Module password: The default password is “paradox” and you will be prompted to change this after your first login.Panel user code: This is the pin number that you normally use to arm and disarm your alarm system via the keypad.When you enter the IP address of your Paradox IP150 into a browser, the following login screen will load. Step 4: Connecting to the Paradox IP150 Internet Module Once you find the new IP address on your network, copy this IP address and paste it into your web browser to open up the Paradox IP150’s web interface. Alternatively, I chose to download the Fing iOS or Android app and scan my network for connected devices. You can find the IP address in your router DHCP by reviewing all the devices connected to your network and looking for the Paradox IP150. Step 3: Finding the IP address of your Paradox IP150 As this cupboard is at a central point in my house, it was also convenient location to run other Ethernet cables off to my Hikvision Surveillance cameras and Unifi Access Points. In my case, I wired a switch into a cupboard that houses my Paradox Magellan MG5050 alarm panel and then connected my POE switch to a router in my office via an Ethernet cable. This means that you will need to run an Ethernet cable from your router or switch to the cabinet that houses your alarm system control panel. The Paradox IP150 is equipped with a LAN/Ethernet port.
Panel port on the Paradox IP150 Step 2: Connecting the Paradox IP150 to your wired Local Area Network (LAN)
0 kommentar(er)
